Stair Company Hamptons – Why Read Much More Into This Point..

Should you be buying a stair with balusters in a contrasting material, like painted balusters on an oak stair, questions will probably arise regarding the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters installed when the stair is completed?

Here are a few points to consider with Stair Railings Suffolk County: Your painter will normally opt for painting the balusters before installation. This enables them to be sprayed instead of brushed and eliminates lots of “cut-in” work.

Painting balusters separately means that this stair installers will have to return to the web page, take away the railings and install the balusters. You will see charge for this “second trip” towards the jobsite. You will need to make sure to schedule this “second trip” in coordination using the completing the conclusion.

Leaving your balusters out for painting implies that they will probably be lost or stolen during this time. You will be accountable for balusters left on the jobsite. Once the painted balusters are finally installed, you will have additional “touch-up finishing required at the rail joints. Holes will have to be filled and stain and finish re-requested the final finish.

Plan installing of your hardwood stair for after your drywall continues to be taped, sanded, and primed. The drywall process can cause damage to the stair. Drywall mud and paint overspray will make the stair finishing process extremely tough and might make desired results impossible to attain.

Most hardwoods are an open grain wood and once dirt gets a part of open grain it is quite difficult to remove, even with sanding. This can possess a negative effect on the appearance and texture from the finish. Care must also be taken to safeguard the stair from dirt and mud.

Never Cover Hardwood Stairs With Plastic. Plastic fails to allow airflow, trapping moisture underneath and resulting in the wood to grow and contract. This expansion and contraction causes the wood joints to open up and may make the wood to break into.

The environmental conditions inside the house are critical to the quality of the stair. Hardwood lumber has been dried through a very controlled process for an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the typical home and allows the wood to stay stable under normal conditions.

In cold climates, when a home is heated to some high temperature in winter, air may become very dry, creating the wood to shrink. This shrinkage will make cracks visible within the wood and joints may begin to open up. Subjecting a stair to high levels of heat is similar to putting it within an oven and can accelerate the deterioration of the stair.

All hardwoods must be sealed on every side to retard movement and protect from being exposed to elements and damage. It is suggested to seal wood immediately.